C S Desai's Home Page

Books (Texts and Proceedings)

2000- 2004 (Selected)

1. “Evaluation of Liquefaction Using Disturbed State and Energy Approaches,” J. of Geotech. & Geoenv. Eng., ASCE, Vol. 126, No. 7, 2000, 618-631.

2. “Cyclic Behavior and Liquefaction of Sand Using Disturbed State Concept,” J. of Geotech. & Geoenv. Eng., ASCE, Vol. 126, No. 9, 2000. (Park, I.J., and Desai, C.S.)

3. “Implementation of DSC Model and Application for Analysis of Field Pile Tests Under Cyclic Loading,” Int. J. Num. Analyt. Meth. Geomech., Vol. 24, No. 6, 2000, 601-624. (Shao, C., and Desai, C.S.)

4. “Review of Models and the Disturbed State Concept for Thermomechanical Analysis in Electronic Packaging,” J. of Elect. Packaging, ASME, Vol. 123, No. 1, March 2001, 19-33. (Desai, C.S., and Whitenack, R.)

5. “Analysis of the Compression of Structured Soils Using the Disturbed State Concept,” Int. J. Num. Analyt. Meth. Geomech., Vol. 24, No. 8, 2000, 723-735. (Liu, M.D., Carter, J.P., Desai, C.S., and Xu, K.J.)

6. (I) “Computing and Computer Modelling in Geotechnical Engineering,” A Keynote Paper, Proc., GeoEng. 2000 Conf. on Geotech. and Geol. Engng., Melbourne, Australia, Nov. 2000. (Carter, J.P., Desai, C.S., Potts, D.M., Schweiger, H.F. and Sloan, S.W.)

7. “Improved Finite Element Simulation of Excavation in Elastic and Elasto-plastic Geologic Media,” J. of Rock Mech. And Tunnelling Tech., Vol. 7, No. 1, 2001, pp. 11-28. (Sharma, K.G., Varadarajan, A., and Desai, C.S.)

8. “Mechanics of Materials: Constitutive Modeling Including the Disturbed State Concept,” Keynote Paper, Int. Conf. on Theoretical, Analytical, Computational and Experimental Mechanics, Indian Inst. of Tech., Kharagpur, India, December 2001.

9. “Analysis of a Powerhouse Cavern in the Himalaya,” Int. J. of Geomechanics, Vol. 1, No. 1, 2001, pp. 109-127. (Varadarajan, A., Sharma, K.G., Desai, C.S., and Hashemi, M.)

10. (I) “Mechanistic Pavement Analysis and Design Using Unified Material and Computer Models,” Keynote Paper, Third Intl. Symp., 3D Finite Element for Pavement Analysis, Design and Research, Amsterdam, The Netherlands, April 2002.

11. “Testing and Modelling of Solders Using New Device: Part I: Models and Testing,” and “Testing and Modelling of Solders Using New Device: Part II: Calibration and Validation,” J. of Electronic Packaging, ASME, approved for publication, 2003. (Desai, C.S., Wang, Z., Whitenack, R., and Kundu, T.)

12. “Parameter Optimization and Sensitivity Analysis for Disturbed State Constitutive Model,” J. of Geotech. and Geoenv. Engng.,ASCE, submitted 2003. (Desai, C.S., and Chen, J. Y.)

13. ”Prediction of Field Behavior of Geosynthetic – Reinforced Soil Wall,” J. of Geotech. and Geoenv. Engng.,ASCE, accepted 2004. (Desai, C.S., and El-Hoseiny, K.E.)

14. “Cyclic Testing and Constitutive Modeling of Saturated Sand-Concrete Interfaces Using the Disturbed State Concept,” Int. J. of Geomechanics, submitted 2003. (Desai, C.S., Pradhan, S.K. and Cohen, D.)

15. “DSC Model for Soil and Interface Including Liquefaction and Prediction of Centrifuge Test,” J. of Geotech. and Geoenv. Eng., ASCE, submitted 2003. (Pradhan, S.K. and Deai, C.S.)